Shenzhen Bainexin Technology Co., Ltd. is a high-tech enterprise integrating R&D, design, production and sales services. It specializes in providing automatic welding, testing equipment and overall technical solutions for new energy lithium battery assembly equipment and manufacturing field. We are committed to becoming a new energy lithium battery assembly equipment and technical service provider.
Lithium battery automatic veneer
Scope of application: 18650 26650 21700 cylindrical battery series
This machine is suitable for automatic bonding of 18650 battery positive insulator sheet (barley paper). It adopts man-machine interface with high degree of automation and easy operation.
Second, the production efficiency is high, only manual feeding, simple settings can automatically complete the pasting process of highland barley paper, according to the actual situation, one person can manage multiple machines at the same time.
Convenient feeding: Machine feeding hopper inclined design, box-mounted cores can be directly loaded into the whole box, convenient and efficient; hopper can be loaded with more than 500 cores at a time, according to the actual situation, one person can manage multiple equipment.
Fourth, intelligent detection/automatic removal: automatic testing of internal resistance, voltage and polarity of batteries, automatic removal of unqualified batteries, improve efficiency, prevent short circuit caused by manual reversal polarity; test qualified products flow to the next station to stamp insulating gaskets, accurate and rapid automatic cutting gaskets, paste gaskets, insulating gaskets not pasted products are automatically detected and eliminated.
Five, accurate and fast testing: standard our company BK300 internal resistance tester, internal resistance voltage can be set by itself upper and lower limits (compatible with all kinds of existing factory internal resistance instruments) voltage internal resistance detection function can be closed, optional. Internal resistance voltage test can be installed with computer data storage function and called at any time.
Sixth, Degumming-free design: Press front and back glue and die separation design, compared with other machines on the market, do not need to keep spraying glue out of the liquid, do not need to frequent cleaning of the die.
7. Consistency of bonding position, separation of small holes in the middle ring after punching, alignment of base paper and punching for feeding, reducing the influence of residual backing glue on die and feeding wheel. Fit firmly, do not affect the rear automatic welding.
High efficiency of patch: the speed of the whole machine with test is over 2200 PCS/h, and that of the single machine without test is over 4500 PCS/h.
Convenient and safe: If the manufacturer has errors in the length of various cores, the equipment can be adjusted slightly to avoid improper sticking; the stamping stroke of the cylinder can be compressed to avoid serious damage to the cores caused by the direct internal pressure of the motor.
Input voltage: single-phase to 220V, 50Hz 2KW
Equipment Pressure: 0.4-0.8 Mpa
Material specification requirements: maximum diameter of barley paper roll 350MM, core diameter 72-75MM
Feeding mode: discharging core hopper: 400 PCS can be put in one time. It can be divided into two sections. Subsection delivery
Production efficiency: 4000PCS/hour, single punch 4PCS
Surface Pad Shape: Outer Diameter 17.8MM Inner Diameter 9MM
Size: 1100L * 980M * 1500H
Pad Material: Barley Paper or PVC Material
Applicable Core: 18650 Core Positive or Negative Auto-pasting Barley Paper Surface Pad or PVC Material
Controller: 7.5 inch touch screen, PLC programmer and stepper motor
Whole machine weight: about 200 KG